THEORY: Theory #1: In theory a spirit/ghost may give off a magnetic field, an electric field, and/or a radio/microwave field that can be picked up by a Tri Field Meter. A spirit/ghost may also try to use these fields to manifest.

Theory #2: When a spirit/ghost manifests it needs energy to do so. In an area where there is a high EMF field, the spirit/ghost may draw in that high EMF and manifest.

HOW TO USE: Set the meter to Magnetic, Electric, or Radio/Microwave. Majority of the times we will use the “Magnetic” setting. While investigating, you need to remain very still while using this meter because it picks up the earths natural magnetic poles. When you turn on the meter it will read the maximum reading because the meter needs to zero itself out. When there is no direction change, the meter will have a normal reading. NOTE: If you move slightly the meter will jump up because you’re crossing the meter with the earth’s magnetic poles.

RANGE: Magnetic: The range on the meter at this setting is 0mg – 100mg. The range from the meter to the active field is from 0 – 8 feet.

Electric: The range on the meter at this setting is 0volts – 100volts. The range from the meter to the active field is from 0 – 6 feet.

Radio/Microwave: The range on the meter at this setting is .01mW/cm2 1mW/cm2The range from the meter to the active field is from 0 – 20 feet.

NOTE: This is a natural tri-field meter so it will pick up lightning, static electrical charges, earths magnetic poles etc. The ranges on the active fields listed here are at specific sources.

READINGS: Magnetic: The unit of measure for this setting is milligauss (mg). Paranormal activity occurs between 3mg – 8mg.

Electric: The unit of measure for this setting is voltage. Paranormal activity occurs between 3volts – 8volts.

Radio/Microwave: The unit of measure for this setting is microwaves divided by centimeters squared (mW/cm2). Paranormal activity occurs between .1mW/cm2 – .3mW/cm2.

Sum: The “sum” setting on this meter is when there are any changes in either the magnetic or electrical setting.

Also paranormal activity may cause erratic movement through the needle in any given setting.


Return To Previous Page