FACT: The Electrosmog Meter detects wave field strengths of radio frequencies. This meter does not detect magnetic fields.

THEORY: Theory # 1: When a ghost is trying to manifest, it may generate a radio frequency, which may be detected by this meter.

Theory # 2: In theory a spirit can communicate with you through this meter by tapping into different radio frequencies and lighting up the LED lights. There would be 2 dashes of light if the answer is “yes,” and 1 dash of light if the answer is “no.” (This is Chris Flemmings theory on the K-II Meter.) NOTE: (At this time LIPI is in the process of testing this theory in the field.)

HOW TO USE: To turn on the meter, switch the button on the side to the “on” position. Hold the meter vertically to get an accurate reading. If the meter gets a reading, try to locate where the reading is coming from by going over your previous pathway. When the investigation is complete, write down your readings in the field report.

RANGE: The range on this meter is –55dBm to –5dBm, and a broad bandwidth range of 300MHz to 3GHz. The range from the meter to the active field depends on the strength of the source. Listed are some known ranges. Wireless routers 0-50 feet, Cellular phones 0-12 feet, Walkie-talkies 0-20 feet, CB radios 0-50 feet, Car alarms 0-6 feet, and Microwaves (turned on) 0-50 feet.

READINGS: The unit of measurement on this meter is decibels of the measured power reference to one milliwat (dBm). (dBm) is a unit for power measurement. Normal activity through this meter is –55dBm to –35dBm. Paranormal activity occurs between –30dBm to –15dBm. Any readings above –10dBm is probably non paranormal. This meter will detect all different types of things that give off or generate radio frequencies, such as wireless routers, cellular phones, walkie-talkies, CB radios, police scanners, car alarms, microwave ovens, etc. The readings for Theory # 2, is that the LED lights will blink twice for “yes,” and once for “no.”

 


Return To Previous Page